Tri-Zone All Sports Boots
All round tested protection in a lightweight, protective boot. Suitable for all disciplines, you won’t find a more versatile boot.
• Extremely lightweight; they even float on water!
• Safety tested in an independent laboratory.
• Flexible.
• Breathable, allows the heat out to reduce the temperature of your horses' leg.
• All round protection with four-layer system, including integral tendon guard.
• Used on both front and hind legs.
• Sold in pairs.
What inspired the Tri-Zone All Sports Boots?
Brushing boots are traditionally used across all disciplines. However, in general, they tend to only provide protection from brushing and are made from a non-breathable neoprene. Equilibrium wanted to create something that could truly be used for any activity, with all round protection. Alongside this protection, Equilibrium wanted to ensure maximum comfort for the horse, as well as taking into account leg health. Therefore, the super lightweight, breathable, flexible, and protective boot known as All Sports Boots was born!
Protection provided by the All Sports Boots for horses.
The boot design uses a four-layer system, each chosen for their unique properties.
The first layer is providing an inner lining that sits against the horses' leg. Made from perforated EVA (Ethylene-Vinyl Acetate), the liner sits comfortably against the leg. The perforations allow heat to escape and aids breathability, while the flexibility of the material allows it to mould to the horses' leg.
Layer two is a strong nylon mesh. This adds another layer of protection to the sports boots, but also stops any debris making its way into the boot towards your horses' leg.
Layer three is the internal guard made from vinyl - a strong, durable and moisture resistant material. This layer is placed over the vulnerable tendon area and is made with strips of material to allow it to mould around the horses leg. This allows the horse to move freely without the feeling of a ‘splint’.
Lastly, the outer layer is an EVA waffle. Commonly used in the soles of human shoes and as padding on sports equipment, this material is durable, breathable, and protective! We’ve made sure it's easy to clean and maintain too!
Who are Tri-Zone All Sports Boots for?
Anyone can use Tri-Zone All Sports Boots! However here are a few scenarios they are commonly used in:
• As a breathable turnout boot.
• A lightweight cross country with internal tendon protection.
• A hacking or endurance boot that doesn't hold water.
• A comfortable flatwork boot offering all round protection.
• As a durable and long-lasting everyday boot.
How do I care for the Tri-Zone All Sports Boot?
Machine washable at 30 degrees, so you can quickly and easily clean your boots. Our Hook Cleaner Brush can also help keep your straps debris free and prolong their life.
Or for quick day to day care, you can give them a short rinse on the yard and leave them to dry ready for the next day.

A great value, super-stylish boot, perfect to use every day for hacking, schooling, lunging and turnout. Extremely lightweight; they don’t hold water!

• Independently tested for breathability and protection.
• Flexible.
• Breathable.

Made from high quality Spacer Fabric and EVA Waffle making them flexible, durable, comfortable to wear and breathable. The design ensures your horses’ legs are kept cool, whilst protecting your horses’ legs from brushing during ridden work or out in the field.

Fluorescent variation made using highly reflective tape that meets the standard EN 20471.

Can be worn on front or hind legs as required.

What is the inspiration behind the Tri-Zone Brushing Boots?

As preventing horses’ legs from overheating is such a ‘hot’ topic, we wanted to create a brushing boot that moved away from the traditional neoprene to something that is scientifically tested to fulfil its role protecting the leg from brushing related injuries, while remaining as breathable as possible. While the Tri-Zone All Sports Boots are very breathable, not every horse or activity warrants maximum or all round protection, so a durable and lightweight brushing boot was the solution.

What are the materials used in the Tri-Zone Brushing Boots?

Inner Layer: The spacer fabric on the inside of the boot creates a soft lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin. This fabric doesn’t hold water, to ensure they stay lightweight even when wet!

Outer Layer: EVA material is commonly found in the soles of human shoes and as padding on sports equipment - this material is durable, breathable, and protective. We’ve made sure it's easy to clean and maintain too. Tested in a laboratory to withstand a considerable amount of brushing action, the EVA is abrasion and scratch resistant, doesn’t hold any water and offers great impact protection.

Who are the Tri-Zone Brushing Boots for?

In short, the Tri-Zone Brushing Boots are for everyone. Due to the breathable and protective properties of the boot they can be for flatwork, hacking, can even splash through water without the boots becoming heavy as they do not with hold water, or turnout in all conditions.

The breathable material makes them perfect for all year round especially in hot weather, unlike traditional neoprene brushing boots, the Tri-Zone Brushing Boots provide good ventilation to keep your horses legs cool and are the most breathable boot within our range.

Due to their design and the sizes available, they fit a wide variety of horses too – from those with little bone to horses with feather. Their design also allows for free movement of the fetlock – a high motion joint that plays a fundamental part in how your horse moves.

How do I care for the Tri-Zone Brushing Boots?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius.  Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

How do I fit the Brushing Boots?

1. Take measurements. Most boot brands will offer boots in sizes ‘small’, ‘medium’ and ‘large’ or ‘pony’, ‘cob’ and ‘full’, but these can be rather abstract terms (as many of us will have experienced when trying to shop for clothes – one shop’s ‘small’ is another’s ‘extra-large’!), so having an idea of your horse or pony’s actual measurements can help. We’d recommend measuring both front and hind legs, as it is very common for horses to take different sizes for both. See our size guide for measurements for these boots.
2. When putting the boots on, with the longer part on the inside of your horses’ leg covering the inside of the fetlock joint, slide the boot down the cannon bone until you should feel the boot ‘fit’ into place as the front of the boot comes down to meet the top of the fetlock joint.
3. Correct ‘tension’. One finger should fit snugly between the top of the boot and the horse's leg. If the boot is too tight it could rub the horse's skin, or cause damage to the tendons. If the boot is too loose it could move around or down the leg

Why use Brushing Boots?

Brushing Boots are a popular choice of boot to protect the horse’s lower leg during exercise from ‘brushing’ injuries. These are injuries that may occur if one leg, or hoof, strikes the opposite leg. Brushing boots can also provide protection from minor scrapes and injuries during schooling, hacking, or turnout. This modern brushing boot is also lightweight, durable and the most cost-effective boot for everyday use.

Does your horse need more protection than a Brushing Boot can offer?

Depending on your horse and what you do with them, they might need more protection. While they are a great tack room staple, Brushing Boots are great for protection against brushing, but not too much else. With an advancement in materials, some boots are made from highly breathable materials, while offering more all round protection. Take a look at the Tri-Zone All Sports Boots for example. These boots not only offer all round protection, but specific tendon protection too. This might be useful when jumping, doing fast work, or on a big moving horse.

• Allows your horse to move without restriction with 4-way stretch.
• Soft inner ‘jersey’ lining designed with the most sensitive horses in mind.
• Actively ‘pumps’ air away from the leg through perforated domes in the fabric.
• Long-lasting, quality material that stands the test of time.
• All round protection with targeted cushioning over the areas prone to brushing injuries.

Suitable for schooling, hacking and everyday use. Easy to fit, easy to wash and extremely comfortable for the horse to wear.

Can be worn on front or hind legs as required.

With 1 year product guarantee.

Sizes: S, M, L, XL.

Colour: Black and White.

More Information
What is the inspiration behind the Stretch & Flex Wraps?

A horse called Timmy was the inspiration behind these innovative support wraps. Timmy had extremely sensitive skin, which were rubbed by other boots. He needed something soft and comfortable, but also something suitable to keep his legs protected, cool and allow him to move freely when dressage training. As a result, the Stretch & Flex Wraps were born!

What are the materials used in the Stretch & Flex Wraps?

Stomatex: Originally developed for human athletes, Stomatex® was designed to provide four-way stretch, to enable use around mobile joints, and an outstanding ability to keep the skin dry. It is commonly used in the manufacture of heat acclimatisation suits, padding for wheelchairs, special wetsuits and sports injury support bandages. The material mimics the way a leaf ‘breathes’, which allows the horses leg to stay cool and maintains an ideal skin temperature over an extended period of time. The way the material works is by efficiently moving trapped vapour molecules from beneath the fabric by the flexing action of minute dome shaped chambers which contain a tiny pore in the centre. This also gives it it’s unique appearance.
Automotive Grade Cushioning Spacer Mesh: This mesh is strategically placed over the inside of the cannon bone for extra protection. The spacer fabric has an additional jersey fabric on the inside of the boot to create an even softer lining against your horses’ leg. Ideal to act as a ‘cushion’ and comfortable to wear, the spacer fabric is also fantastic at letting heat and moisture pass through easily to get sweat and warmth away from the skin.

Who are the Stretch & Flex Schooling Wraps for?
Primarily designed for schooling or a smart, comfortable, and protective competition boot, Stretch and Flex Wraps are shaped to fit comfortably around the contours of the horse’s leg making them ideal for horses with knocks, scars or splints.
The stretch fabrics and boot construction means your horse can move with ease, and so the boots are popular for flatwork, including lateral or advanced movements.

How do I care for the Stretch & Flex Wraps?

The boots can be washed off with a rinse from the hose or if needing a slightly more thorough wash, they are machine washable at 30 degrees Celsius. Leave them to air dry away from a direct heat source and they will be dry and ready to use in no time!

Why use these schooling wraps?

Offering an alternative to bandages, these support boots are not only easy to put on, but breathable and comfortable for your horse too. Available in two different styles giving you the choice of added fetlock coverage with the Training Wraps, or a brushing boot design with the Flatwork Wraps, the boots feature a unique material that allows a close, comfortable, and flexible fit.